LG cooktops report problems with an F code or with blinking zone lights, where the number of blinks tells you the fault. Many of them are wet glass or a pan left on the keys. The rest point to a sensor, a fan or an inverter board.





| Code | Name | What the cooktop detected |
|---|---|---|
1 Flash | Sensor or control chip fault | One blink on a zone light means the control found a problem with a temperature sensor or with the control chip on the board. |
2 Flash | Second sensor circuit fault | Two blinks point to one specific sensor circuit, the second thermistor, reading open or shorted, or the board input for it failing. |
3 Flash | Third sensor circuit fault | Three blinks point to the third thermistor reading open or shorted, or a fault in the board input for it. |
4 Flash | Something is resting on the keys | Four blinks mean water, a pot, metal or food spill has been sitting on the touch controls, or a key was held for more than ten seconds. |
5 Flash | Display board fault | Five blinks mean the control found a problem with the display. |
6 Flash | Low supply voltage | Six blinks mean the cooktop sees low incoming voltage. |
d0 | Key held too long | A touch key read as pressed for more than eight seconds. Usually moisture or food on the glass, sometimes a failing display board. |
E1 | Keypad not talking to main board | The main board and the keypad LED board lost communication. |
F0 | Inverter power stage short | The power transistor stage on the inverter board shorted. A fan that is not running often leads to this. |
FC | Inverter power stage short | Same as F0 on other models. The inverter power stage shorted, often after a cooling fan stopped. |
F1 | Left front zone sensor fault | The left front zone temperature sensor reads open or shorted. |
F2 | Left rear zone sensor fault | The left rear zone sensor reads open or shorted. |
F3 | Right front zone sensor fault | The right front zone sensor reads open or shorted. |
F4 | Right rear zone sensor fault | The right rear zone sensor reads open or shorted. |
F5 | Left inverter sensor fault | The temperature sensor on the left inverter board reads open or shorted. |
F7 | Left inverter not talking | The main board lost contact with the left inverter board. |
F8 | Right inverter not talking | The main board lost contact with the right inverter board. |
F9 | Center zone sensor fault | On cooktops with a center zone, its temperature sensor reads open or shorted. This is different from F9 on an LG range. |
FE | Cooling fan locked | A cooling fan under the glass is stuck or not running. |
Tell us the code and model, we usually know the fix before we arrive. Same-day across Orange County.