LG microwave codes start with F and mostly point to sensors, the keypad or the inverter that powers the magnetron. Unplugging for a minute is safe and clears a lot of them. Anything past that is inside a cabinet with high voltage, so leave it closed and call us.




| Code | Name | What the microwave detected |
|---|---|---|
F1 | Temperature sensor shorted | On convection models the oven temperature sensor reads shorted. A bad main board can also cause it. |
F2 | Temperature sensor open | On convection models the oven temperature sensor reads open. |
F3 | Keypad not responding | The main board is not getting any signal from the touch pad, so buttons stop working or press the wrong thing. |
F4 | Humidity sensor fault | The humidity sensor used for sensor cooking reads open or shorted. |
F5 | Damper not moving | The board called for the vent damper to move and did not see it happen. The damper motor or its switch is at fault. |
F11 | Inverter not talking | The main board lost contact with the inverter power board that drives the magnetron. |
F13 | Inverter over current | The inverter board drew too much current and shut down. |
F14 | Inverter over voltage | The inverter sensed voltage above its limit. |
F15 | Inverter under voltage | The inverter sensed voltage below its limit. |
F16 | Inverter overheating | The inverter heat sink got too hot. |
F17 | Inverter temperature sensor fault | The inverter's own temperature sensor flagged overheating. |
F19 | Inverter shut down to protect itself | The inverter saw a voltage problem that usually comes from the magnetron or from arcing inside the cavity. |
Tell us the code and model, we usually know the fix before we arrive. Same-day across Orange County.