LG APPLIANCE REPAIR Factory Authorized Service · Irvine, CA

LG Microwave Error Codes: What Each Code Means

LG microwave codes start with F and mostly point to sensors, the keypad or the inverter that powers the magnetron. Unplugging for a minute is safe and clears a lot of them. Anything past that is inside a cabinet with high voltage, so leave it closed and call us.

Call (949) 876-7373 Text Us
CodeNameWhat the microwave detected
F1Temperature sensor shortedOn convection models the oven temperature sensor reads shorted. A bad main board can also cause it.
F2Temperature sensor openOn convection models the oven temperature sensor reads open.
F3Keypad not respondingThe main board is not getting any signal from the touch pad, so buttons stop working or press the wrong thing.
F4Humidity sensor faultThe humidity sensor used for sensor cooking reads open or shorted.
F5Damper not movingThe board called for the vent damper to move and did not see it happen. The damper motor or its switch is at fault.
F11Inverter not talkingThe main board lost contact with the inverter power board that drives the magnetron.
F13Inverter over currentThe inverter board drew too much current and shut down.
F14Inverter over voltageThe inverter sensed voltage above its limit.
F15Inverter under voltageThe inverter sensed voltage below its limit.
F16Inverter overheatingThe inverter heat sink got too hot.
F17Inverter temperature sensor faultThe inverter's own temperature sensor flagged overheating.
F19Inverter shut down to protect itselfThe inverter saw a voltage problem that usually comes from the magnetron or from arcing inside the cavity.

Code Keeps Coming Back?

Tell us the code and model, we usually know the fix before we arrive. Same-day across Orange County.

Call (949) 876-7373 Text Us
⚡ $25 OFF For new & referred customers