The main board reads the fresh food sensor as open or shorted. The control only sets this code when it sees 0 or 5 volts DC on that line.


We measure the thermistor resistance and compare it to the chart for the actual temperature in the cabinet. If the sensor is in range we follow the wire back to the main board connector and check for a pinched or corroded wire.
The main board reads the fresh food sensor as open or shorted. The control only sets this code when it sees 0 or 5 volts DC on that line.
Note whether the fridge section feels warmer or colder than usual. Unplug the refrigerator or switch off its breaker for 5 minutes, then power it back up and see if the code returns.
We measure the thermistor resistance and compare it to the chart for the actual temperature in the cabinet. If the sensor is in range we follow the wire back to the main board connector and check for a pinched or corroded wire.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.