LG APPLIANCE REPAIR Factory Authorized Service · Irvine, CA

LG Dishwasher AE / E1 Code: Leak detected in the base

Water reached the float switch in the base pan under the tub, so the dishwasher stops and runs the drain pump. Some models show AE, others E1.

Call (949) 876-7373 Text Us
✅ Factory Authorized LG Service Provider 🛡️ Licensed & Insured ⚡ Same-Day Appointments 🔧 90-Day Parts & Labor Warranty
LG dishwasher

Try these quick checks first (free & safe)

  1. Turn the dishwasher off and wipe up any water on the floor.
  2. Check that the dishwasher sits level. A tilt of about 3 degrees forward is enough to cause this.
  3. Look for grease or food on the door gaskets and wipe them clean.
  4. Never use hand dish soap in the machine. Suds can spill into the base.

What our technician checks

We check level and mounting brackets, the bushings at the front tub corners, door gaskets and the spray arms for a split seam. We also watch a fill to see whether the water valve sticks open. Then we dry the base and test the float switch: open with 5 volts DC across it, closed at about 0.2 to 0.3 ohms with 0 volts.

LG dishwasher repair in Irvine and Orange County →

LG AE / E1 code: FAQ

What does the AE / E1 code mean on an LG dishwasher?+

Water reached the float switch in the base pan under the tub, so the dishwasher stops and runs the drain pump. Some models show AE, others E1.

Can I clear the AE / E1 code myself?+

Turn the dishwasher off and wipe up any water on the floor. Check that the dishwasher sits level. A tilt of about 3 degrees forward is enough to cause this. Look for grease or food on the door gaskets and wipe them clean. Never use hand dish soap in the machine. Suds can spill into the base.

What does a technician check for AE / E1?+

We check level and mounting brackets, the bushings at the front tub corners, door gaskets and the spray arms for a split seam. We also watch a fill to see whether the water valve sticks open. Then we dry the base and test the float switch: open with 5 volts DC across it, closed at about 0.2 to 0.3 ohms with 0 volts.

Other common LG Dishwasher Error Codes

OE: Water not draining IE: Water not coming in HE: Water not heating tE: Water temperature sensor fault LE: Wash motor fault FE: Too much water nE: Spray diverter motor fault bE: Too many suds PF: Power was interrupted CL: Control lock is on, not a fault

LG Dishwasher Showing AE / E1?

Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.

Call (949) 876-7373 Text Us
⚡ $25 OFF For new & referred customers