Water reached the float switch in the base pan under the tub, so the dishwasher stops and runs the drain pump. Some models show AE, others E1.


We check level and mounting brackets, the bushings at the front tub corners, door gaskets and the spray arms for a split seam. We also watch a fill to see whether the water valve sticks open. Then we dry the base and test the float switch: open with 5 volts DC across it, closed at about 0.2 to 0.3 ohms with 0 volts.
Water reached the float switch in the base pan under the tub, so the dishwasher stops and runs the drain pump. Some models show AE, others E1.
Turn the dishwasher off and wipe up any water on the floor. Check that the dishwasher sits level. A tilt of about 3 degrees forward is enough to cause this. Look for grease or food on the door gaskets and wipe them clean. Never use hand dish soap in the machine. Suds can spill into the base.
We check level and mounting brackets, the bushings at the front tub corners, door gaskets and the spray arms for a split seam. We also watch a fill to see whether the water valve sticks open. Then we dry the base and test the float switch: open with 5 volts DC across it, closed at about 0.2 to 0.3 ohms with 0 volts.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.