On older dryers HS is a humidity sensor fault. It often shows when the installation check or Flow Sense test runs while the dryer is still warm. On newer dryers it appears only in install mode when the moisture sensor bars are shorted.


We measure the humidity sensor, about 550 to 600 ohms red to black on older models, and check the moisture sensor bars and harness for a short.
On older dryers HS is a humidity sensor fault. It often shows when the installation check or Flow Sense test runs while the dryer is still warm. On newer dryers it appears only in install mode when the moisture sensor bars are shorted.
Let the dryer cool fully before running any installation or vent test. Wipe the two metal sensor bars inside the drum with a little rubbing alcohol. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns.
We measure the humidity sensor, about 550 to 600 ohms red to black on older models, and check the moisture sensor bars and harness for a short.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.