On electric and gas dryers the exhaust thermistor on the blower housing reads open or shorted. On heat pump dryers tE1 points to the drum outlet sensor.


We measure the thermistor from the main board connector while the code is active and compare it to the temperature chart. Heat pump drum outlet sensors read about 10 kilohms at room temperature. If the sensor checks good we follow the harness, since an open wire gives the same code.
On electric and gas dryers the exhaust thermistor on the blower housing reads open or shorted. On heat pump dryers tE1 points to the drum outlet sensor.
Clean the lint screen. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns.
We measure the thermistor from the main board connector while the code is active and compare it to the temperature chart. Heat pump drum outlet sensors read about 10 kilohms at room temperature. If the sensor checks good we follow the harness, since an open wire gives the same code.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.