On electric and gas dryers tE2 means the thermistor reads shorted, open or far too cold, which can happen when cold outdoor air pours back in through the vent. On heat pump dryers tE2 points to the compressor discharge sensor.


We read the thermistor against its chart and inspect the outside vent flap. In Orange County a stuck open flap is the usual reason, not real cold. On heat pump models we test the compressor discharge sensor and its harness.
On electric and gas dryers tE2 means the thermistor reads shorted, open or far too cold, which can happen when cold outdoor air pours back in through the vent. On heat pump dryers tE2 points to the compressor discharge sensor.
Check that the outside vent flap closes and is not stuck open. On a cold morning run a Normal cycle for about 5 minutes to warm the dryer before using a steam cycle. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns.
We read the thermistor against its chart and inspect the outside vent flap. In Orange County a stuck open flap is the usual reason, not real cold. On heat pump models we test the compressor discharge sensor and its harness.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.