The main board lost the feedback signal from the freezer evaporator fan. Ice built up around the blade is the usual reason, which often means the defrost system is the real problem.


We pull the rear panel and look at the frost pattern on the evaporator. A solid block of ice means we test the defrost heater, defrost sensor and board output before touching the fan. If the coil is clean and the fan still will not spin, we replace the fan (or the full grille assembly on certain serial ranges) and confirm feedback in test mode.
The main board lost the feedback signal from the freezer evaporator fan. Ice built up around the blade is the usual reason, which often means the defrost system is the real problem.
Open the freezer and listen for the fan behind the back panel. Silence or scraping points to ice on the blade. Do not block the vents on the freezer back wall with food. Unplug for a few hours with doors open and towels down to melt the ice, then plug back in. If the code returns within days, defrost needs service.
We pull the rear panel and look at the frost pattern on the evaporator. A solid block of ice means we test the defrost heater, defrost sensor and board output before touching the fan. If the coil is clean and the fan still will not spin, we replace the fan (or the full grille assembly on certain serial ranges) and confirm feedback in test mode.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.