The main board saw very high current on the motor circuit. Something is making the motor work far too hard or the motor itself has a fault.


If the drum drags by hand we look for a trapped object between inner and outer tub, and if there is none the tub bearings are usually worn. If the drum turns freely we test the stator windings and the plug at the main board. A shorted stator or a failing inverter section on the board both show up as CE.
The main board saw very high current on the motor circuit. Something is making the motor work far too hard or the motor itself has a fault.
Take a few items out and restart. A badly overloaded drum can cause it. With power off, turn the drum by hand and feel for drag or grinding. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns.
If the drum drags by hand we look for a trapped object between inner and outer tub, and if there is none the tub bearings are usually worn. If the drum turns freely we test the stator windings and the plug at the main board. A shorted stator or a failing inverter section on the board both show up as CE.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.