LG APPLIANCE REPAIR Factory Authorized Service · Irvine, CA

LG Washer PE Code: Water level sensor fault

The pressure sensor that tells the board how much water is in the tub is reading open or shorted, so the washer cannot fill or drain correctly.

Call (949) 876-7373 Text Us
✅ Factory Authorized LG Service Provider 🛡️ Licensed & Insured ⚡ Same-Day Appointments 🔧 90-Day Parts & Labor Warranty
LG washer

Try these quick checks first (free & safe)

  1. Turn the washer off and back on and start a new cycle.
  2. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns.
  3. If it repeats, stop using the washer so it does not overfill.

What our technician checks

We check the sensor plug at both ends, then measure about 20 to 25 ohms across the sensor from the main board with power off and roughly 2.5 to 3 volts DC on its signal pins with power on. A pinhole in the thin air tube gives erratic readings, and since that tube comes only with the sensor, the assembly is replaced together.

LG washer repair in Irvine and Orange County →

LG PE code: FAQ

What does the PE code mean on an LG washer?+

The pressure sensor that tells the board how much water is in the tub is reading open or shorted, so the washer cannot fill or drain correctly.

Can I clear the PE code myself?+

Turn the washer off and back on and start a new cycle. Unplug the machine for 10 minutes, plug it back in and run a short cycle to see if the code returns. If it repeats, stop using the washer so it does not overfill.

What does a technician check for PE?+

We check the sensor plug at both ends, then measure about 20 to 25 ohms across the sensor from the main board with power off and roughly 2.5 to 3 volts DC on its signal pins with power on. A pinhole in the thin air tube gives erratic readings, and since that tube comes only with the sensor, the assembly is replaced together.

Other common LG Washer Error Codes

OE: Water not draining in time IE: Not enough water coming in UE: Load out of balance LE: Motor cannot turn the drum CE: Motor drawing too much current dE: Door not detected as closed FE: Too much water in the tub tE: Water temperature sensor fault AE: Water in the base pan PF: Power was interrupted CL: Child lock is on

LG Washer Showing PE?

Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.

Call (949) 876-7373 Text Us
⚡ $25 OFF For new & referred customers