The washer opened its fill valves but the water level barely changed in the time it expected. Usually the supply is weak or blocked, not the machine itself.


We measure house water pressure, which needs to be between about 20 and 120 psi. Flood stop hoses with automatic shutoff often trip on the valve's pulsing fill and cause IE, so we check for those too. Then we test the inlet valve coils and the pressure sensor tube, since a pinhole in that tube makes the board think the tub never filled.
The washer opened its fill valves but the water level barely changed in the time it expected. Usually the supply is weak or blocked, not the machine itself.
Open both faucets behind the washer all the way. Straighten any kinked or pinched fill hoses. Turn the faucets off, unscrew the hoses and rinse the small screens at the valve inlets. If the drain hose is pushed deep into the standpipe, pull it up so only about 4 inches is inside. A deep hose can siphon water out as fast as it comes in.
We measure house water pressure, which needs to be between about 20 and 120 psi. Flood stop hoses with automatic shutoff often trip on the valve's pulsing fill and cause IE, so we check for those too. Then we test the inlet valve coils and the pressure sensor tube, since a pinhole in that tube makes the board think the tub never filled.
Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.