What each LG error code means, what's safe to try yourself, and when to call an authorized technician. Bookmark this page.

| Code | What it means | What to do |
|---|---|---|
OE | Drain error, water not drained in time | Clean drain pump filter; check hose; drain pump may need replacement |
UE / Ub | Unbalanced load | Redistribute the load; persistent UE = suspension or leveling issue |
LE | Motor locked / rotor position sensor | Unplug 10 min; if it returns, hall sensor or motor service needed |
dE / dE1 / dE2 | Door open / lock fault | Re-close door; latch assembly often needs replacement |
IE | Water inlet error, not filling | Check faucets & inlet screens; inlet valve may be failing |
PE | Pressure sensor error | Sensor or air hose fault, technician diagnosis |
FE | Overfill error | Inlet valve sticking open, turn off water, call for service |
tE | Heating sensor error | Thermistor circuit fault, needs service |
CE | Motor overcurrent | Overload or motor/board fault, technician diagnosis |
AE | Leak detected (base pan) | Stop using; find and fix the leak before floor damage |
| Code | What it means | What to do |
|---|---|---|
d80 / d90 / d95 | Exhaust duct 80–95% blocked (Flow Sense) | Clean the vent duct line, the dryer itself is warning you |
tE1 / tE2 / tE3 | Thermistor fault | Temperature sensor replacement |
nP | No 240V on one leg (electric) | Check both breakers; may be house wiring or cord |
PS | Power supply / reversed polarity | Electrical supply issue, electrician or technician |
dE | Door switch error | Door switch/latch replacement |
LE1 / LE2 | Motor locked | Blocked blower or failing motor, service call |
| Code | What it means | What to do |
|---|---|---|
Er FF | Evaporator (freezer) fan error | Often iced-up fan, defrost system repair |
Er CF | Condenser fan error | Fan motor replacement |
Er dH | Defrost heater fault | Defrost heater/sensor repair |
Er IF / Er It | Ice compartment fan error / in-door ice maker fault | Ice maker system service |
Er rS / Er FS | Fridge / freezer sensor error | Thermistor replacement |
Er CO | Communication error (boards) | Control board diagnosis |
OF F | Display/demo mode is ON, not a fault | Hold the correct key combo to exit demo mode (model-specific) |
| Code | What it means | What to do |
|---|---|---|
OE | Drain error | Clean filter/sump; drain pump service if it returns |
IE | Water inlet error | Check supply valve; inlet valve replacement |
AE / E1 | Leak detected in base pan | Stop running it, leak must be located and fixed |
LE | Motor error | Wash motor diagnosis |
HE | Heater error | Heating element / thermistor service |
FE | Overfill error | Inlet valve or float sensor fault |
tE | Thermistor error | Sensor replacement |
| Code | What it means | What to do |
|---|---|---|
F9 | Oven not reaching temperature | Igniter (gas) or element/sensor (electric), most common oven repair |
F1 / F2 | Control or sensor circuit fault | RTD sensor / board diagnosis |
F7 / F11 | Stuck or shorted key | Keypad/control replacement |
F19 | Relay board communication fault | Board-level repair |
F3 / F4 | Sensor open/short | Temperature sensor replacement |
Error codes point at a circuit, not always the exact part, a returned code after basic checks means the appliance needs a meter and LG service-mode diagnostics. As an authorized LG servicer we do exactly that, with the diagnostic fee waived when you approve the repair.
Tell us the code and model, we usually know the fix before we arrive. Same-day across Orange County.