LG APPLIANCE REPAIR Factory Authorized Service · Irvine, CA

LG Washer AE Code: Water in the base pan

On a regular front loader a float switch under the tub found water, so the washer stopped and runs the drain pump. On washer and dryer combo models with a heat pump AE means the compressor is locked.

Call (949) 876-7373 Text Us
✅ Factory Authorized LG Service Provider 🛡️ Licensed & Insured ⚡ Same-Day Appointments 🔧 90-Day Parts & Labor Warranty
LG washer

Try these quick checks first (free & safe)

  1. Stop using the washer and turn off the faucets.
  2. Unplug it and look for water under the machine and around the hoses.
  3. Check the fill hose ends and the door gasket for drips.
  4. Combo models: unplug and call us. There is nothing safe to try on the heat pump.

What our technician checks

On a standard washer we find the leak first: hoses inside the cabinet, the tub seal, the pump. If the base is dry, the float or its wiring may be stuck or broken. On a heat pump combo we measure the compressor windings, about 2.6 ohms between each pair on the BLDC type, and check the drive board before deciding on a compressor or board.

LG washer repair in Irvine and Orange County →

LG AE code: FAQ

What does the AE code mean on an LG washer?+

On a regular front loader a float switch under the tub found water, so the washer stopped and runs the drain pump. On washer and dryer combo models with a heat pump AE means the compressor is locked.

Can I clear the AE code myself?+

Stop using the washer and turn off the faucets. Unplug it and look for water under the machine and around the hoses. Check the fill hose ends and the door gasket for drips. Combo models: unplug and call us. There is nothing safe to try on the heat pump.

What does a technician check for AE?+

On a standard washer we find the leak first: hoses inside the cabinet, the tub seal, the pump. If the base is dry, the float or its wiring may be stuck or broken. On a heat pump combo we measure the compressor windings, about 2.6 ohms between each pair on the BLDC type, and check the drive board before deciding on a compressor or board.

Other common LG Washer Error Codes

OE: Water not draining in time IE: Not enough water coming in UE: Load out of balance LE: Motor cannot turn the drum CE: Motor drawing too much current dE: Door not detected as closed PE: Water level sensor fault FE: Too much water in the tub tE: Water temperature sensor fault PF: Power was interrupted CL: Child lock is on

LG Washer Showing AE?

Factory authorized LG repair, parts on the van, 90-day warranty. Same-day across Orange County.

Call (949) 876-7373 Text Us
⚡ $25 OFF For new & referred customers